Monumental Land Surveys

· 2 min read
Monumental Land Surveys

A monumental land survey is really a kind of land survey dealing specifically with the boundaries of the house. All monumental land surveys use physical monuments to mark the boundaries on the land itself. Commonly, the corners of the house are marked with a long iron rod driven vertically into the ground, though there are numerous other styles of physical monuments which might be used.

These monuments are made to be as permanent as possible, though land surveyors many decades ago used wooden posts or natural features which may be destroyed over time, making it difficult to re-trace their work today. Monuments used today could have a cap on top of the iron rod identifying the surveyor who placed it.

This physical monument allows the easy finding of the boundaries and corners of the property when one is physically on the land, although the monumental land survey itself does have some limitations as far as another information provided. For example, it usually isn't concerned with any improvements on the property, such as for example fences or homes, and can not determine whether these were created to code or conform to zoning regulations.

Often, a monumental survey is undertaken in combination with other types of land surveys showing additional information about the property. For example, a monumental survey may be combined with a title survey, that may examine a lot more than the boundaries in determining anything affecting ownership of the land involved.



Oftentimes, a monumental land survey could be undertaken if you find a dispute on the exact land boundaries. For instance, in case a fence has been built or is about to be built on the land, a monumental land survey can mark the exact corners and the boundary between your two properties so the fence's position with regards to the legal property boundary can be evaluated. The monumental land survey can be useful when in the look stages of a construction project.

Before a land surveyor may place the monuments, there are lots of other steps to take, a lot of which are in fact done away from the property in question. Actually, placing the monuments is close to the end of the monumental land surveying process. First, the surveyor must clarify exactly where the boundary should be located by looking at the title and legal description of the house, among other information. Then, these boundaries should be measured on the land itself before they can be marked, and the surveyor will search for any preexisting corner monuments from previous surveys, evaluating their accuracy to determine if the boundary was correctly placed by the prior surveyor. Finally, the brand new monuments are set into place.

Boundary monuments are placed at every corner of the property, including any angle or change of direction of the boundary line. The survey data is then recorded in a land survey plat. The official recording of this survey provides a basis for any future land surveys of the house. If  Daylight Surveyors London  is never recorded properly, it will not be available for future land surveyors if the land is re-surveyed at any point in time. This information carries a scale drawing of the land and its own boundaries, all necessary dimensions to permit a surveyor to determine the property boundaries while in the field and a detailed description of all monuments found or used on the property.